A Composite raised floor:

1. Anti static veneer: melamine (upper layer) phenolic resin (lower layer) total thickness:
2. Base material: medium density board
3. Four sides: aluminum alloy edging
4. Bottom: aluminum foil or galvanized iron plate

Remarks: The surface, bottom and base material shall be pasted with 401 glue. A conductive rubber strip is embedded at the bottom edge to achieve the effect of conductivity and noise reduction.

1. Anti static veneer: melamine (upper layer) phenolic resin (lower layer) total thickness:
2. Base material: medium density board
3. Four sides: anti-static adhesive tape
4. Bottom: aluminum foil
Remarks: The surface, bottom and base material shall be pasted with 401 glue.

1. Screw (adjustable)
2. Upward support
3. Base (can be selected according to specific height)

3、 Anti static raised floor beam

Long beams are used, and short beams are used for corners.

Jiangsu Zhongtian Anti static Floor Main: Jiangsu OA network floor, Jiangsu PVC anti-static raised floor, Jiangsu anti-static floor, Jiangsu all steel ventilation and anti-static floor, machine room office building floor, all steel anti-static floor, all steel anti-static network floor, aluminum alloy anti-static ventilation floor. Welcome to contact us by calling 13951819913 for advice.